Bathroom Light Pull Switch Keeps Breaking: Find the Solution Now!

If your bathroom light pull switch keeps breaking, try loosening the screws holding the cover. If it clicks, the wiring inside may be too cramped, causing pressure on the switch.

Trim back the cable sheath and ensure the cores aren’t too long or bulky inside. Cheap materials or inferior manufacturing can also contribute to switch breakage.

Symptoms Of A Broken Bathroom Light Pull Switch

If your bathroom light pull switch keeps breaking, it may be due to cramped wiring inside the switch causing pressure. Try loosening the screws and trimming back the cable sheath to alleviate the strain.


  • Light fails to turn on/off when you pull the switch
  • Switch feels loose or wobbly
  • Visible damage or fraying on the switch cord

When your bathroom light pull switch is broken, there are several symptoms that indicate a problem. These symptoms are easy to identify and can help you determine whether your switch needs to be repaired or replaced.

Light Fails To Turn On/Off When You Pull The Switch:

  • Pulling the switch does not result in any change in the light’s status.
  • The light remains off even when the switch is pulled multiple times.
  • This indicates a malfunction in the switch mechanism, preventing it from making the necessary connection to turn the light on or off.

Switch Feels Loose Or Wobbly:

  • When you grab the switch and give it a little shake, it feels loose or unstable.
  • The switch may move around more than it should, and this indicates that it isn’t securely attached or that its internal components are damaged.
  • A loose switch can create an unreliable connection, leading to issues with turning the light on and off.

Visible Damage Or Fraying On The Switch Cord:

  • Upon visual inspection, you notice visible damage or fraying on the cord that connects to the pull switch.
  • This can occur due to wear and tear over time or accidents that cause the cord to be pulled too forcefully.
  • Damaged or frayed cords can compromise the electrical connection and make it difficult to turn the light on and off reliably.

Identifying these symptoms can help you understand why your bathroom light pull switch is not working properly. Whether it’s a faulty switch mechanism, a loose connection, or a damaged cord, addressing the issue promptly is essential for ensuring your bathroom light functions correctly.

Common Causes For A Bathroom Light Pull Switch Breakage

Having trouble with your bathroom light pull switch breaking? One common cause could be that the wiring inside is too cramped, putting pressure on the switch. Try loosening the screws holding the cover, trimming back the cable sheath, and ensuring there are no bulky terminal blocks.

Overloading The Switch With Heavy Or Incompatible Light Fixtures:

  • Using light fixtures that are too heavy or incompatible with the light pull switch can put excessive strain on the switch mechanism.
  • Over time, this can cause the switch to break or malfunction.

Poor Quality Or Worn-Out Switch Components:

  • Low-quality or worn-out switch components can lead to breakages.
  • The internal parts of the switch may become weak or corroded, making them more prone to failure.

Incorrect Installation Or Wiring Issues:

  • Incorrect installation or wiring can cause stress on the switch mechanism.
  • This can lead to premature wear and tear, resulting in breakages.
  • Improperly installed switches may also be prone to short circuits or other electrical issues.

Tugging Or Pulling The Cord Too Forcefully:

  • Excessive force when using the pull cord can cause the switch to break.
  • Pulling the cord too forcefully or yanking it can damage the internal mechanisms of the switch.

Age And Wear And Tear:

  • Over time, normal wear and tear can cause the switch to break.
  • The internal components may degrade or become loose, leading to malfunctioning or breakages.

Moisture Or Water Damage:

  • Bathroom environments are often humid, which can lead to moisture or water damage.
  • Water can seep into the switch mechanism and cause it to rust or corrode, leading to breakages.

Physical Damage Or Accidents:

  • Accidental bumps or knocks can cause damage to the switch and lead to breakages.
  • If the switch is located in a high-traffic area or is easily accessible, it may be more prone to physical damage.

Lack Of Maintenance Or Cleaning:

  • Failing to clean or maintain the switch regularly can result in a buildup of dust, dirt, or debris.
  • This can impede the smooth operation of the switch and eventually lead to breakages.

Insufficient Or Outdated Electrical Wiring:

  • If the electrical wiring in the bathroom is outdated or insufficient for the power requirements of the light fixtures, it can put additional strain on the switch.
  • This excess strain can cause the switch to break or fail.

Excessive Heat:

  • Exposing the light pull switch to excessive heat, such as from nearby heating elements or high-powered bulbs, can cause the switch to overheat.
  • Overheating can lead to the degradation of internal components and ultimately result in breakages.

Diy Repairs Or Tampering:

  • Attempting to repair the switch without proper knowledge or skills can cause more harm than good.
  • DIY repairs or tampering can result in misaligned or damaged parts, leading to breakages or malfunctions.

Remember, identifying the cause of your bathroom light pull switch breakages can help you avoid future issues and ensure a properly functioning switch.

How To Fix A Broken Bathroom Light Pull Switch

Having trouble with a bathroom light pull switch that keeps breaking? One possible solution is to loosen the screws attaching the switch cover, as the cramped wiring may be causing pressure on the switch. Trim back the cable sheath and ensure the cores aren’t too long or bulky.

Step 1: Turn Off The Power Supply

To fix a broken bathroom light pull switch, the first step is to turn off the power supply to the light fixture. This is crucial for your safety and to avoid any electrical accidents. Locate the circuit breaker or fuse box and switch off the power to the bathroom.

It’s recommended to use a voltage tester to ensure that the power is completely turned off before proceeding to the next steps.

Step 2: Remove The Switch Cover And Inspect For Any Visible Damage Or Loose Connections

Once the power is turned off, remove the switch cover by unscrewing the screws that hold it in place. Inspect the switch for any visible damage such as cracks, broken parts, or loose connections. Check the wiring inside the switch to ensure there are no loose or disconnected wires.

If you find any visible damage or loose connections, this may be the cause of the switch failure and will need to be addressed.

Step 3: Replace The Broken Switch With A New One Of The Same Type And Voltage Rating

If the switch is visibly damaged or if you suspect it is the cause of the problem, it’s time to replace it with a new one. Purchase a replacement switch of the same type and voltage rating from a hardware store or online supplier.

Make sure to choose a switch that is suitable for use in a bathroom and matches the specifications of the old switch.

Step 4: Connect The Wires To The New Switch, Ensuring Proper Wiring

Before connecting the wires, refer to the manufacturer’s instructions that come with the replacement switch. Identify the live wire (usually black), neutral wire (usually white), and ground wire (usually green or bare copper) in the switch box. Carefully connect each wire to the corresponding terminal on the new switch.

It’s important to ensure proper wiring to avoid any electrical issues or malfunctions.

Step 5: Reattach The Switch Cover And Test The Light

Once all the wires are securely connected to the new switch, reattach the switch cover by screwing it back in place. Turn the power supply back on and test the light by pulling the switch cord. If everything was done correctly, the light should turn on and off smoothly without any issues.

If the light still does not work or if you encounter any problems, it may be necessary to consult a professional electrician for further assistance.

Fixing a broken bathroom light pull switch is a task that can be done by following these steps. Remember to prioritize safety by turning off the power supply before starting any electrical work. By replacing the broken switch with a new one and ensuring proper wiring, you can restore the functionality of your bathroom light and enjoy a well-lit space once again.

Tips For Preventing Future Breakage Of Bathroom Light Pull Switches

Prevent future breakage of bathroom light pull switches with these tips: loosen the screws holding the cover, trim back the cable sheath, and ensure the cores aren’t too long or bulky terminal blocks aren’t inside. Keep the switch off when not in use for safety.

Choosing the right light fixtures and maintaining them properly can help prevent future breakage of bathroom light pull switches. Follow these tips to ensure that your light switch stays in good condition and avoids any unnecessary breakage:

  • Use light fixtures that are compatible with the switch’s maximum load capacity:
  • Check the maximum load capacity of the pull switch and ensure that the light fixture you choose falls within this range.
  • Using light fixtures that exceed the switch’s capacity can put a strain on the switch, leading to breakage.
  • Choose high-quality switches from reputable brands:
  • Invest in switches from well-known brands that are known for their quality and durability.
  • These switches are typically made with better materials and are designed to withstand regular use without breaking.
  • Ensure that the switch is installed correctly, following manufacturer instructions:
  • Carefully read and follow the installation instructions provided by the manufacturer.
  • Improper installation can damage the switch or cause it to break prematurely.
  • Avoid pulling the switch too hard or forcefully:
  • Gently pull the switch to turn the bathroom light on or off.
  • Applying excessive force can damage the internal mechanisms of the switch and lead to breakage.
  • Regularly inspect and maintain the switch for any signs of wear or damage:
  • Periodically check the pull switch for any signs of wear, such as frayed cords or loose connections.
  • Replace any damaged or worn-out parts promptly to prevent further damage.

Remember, by using light fixtures within the switch’s load capacity, choosing high-quality switches, installing them correctly, being gentle with the switch, and regularly inspecting and maintaining it, you can avoid the frustration of a bathroom light pull switch that keeps breaking.

When To Seek Professional Help With A Broken Bathroom Light Pull Switch

If your bathroom light pull switch keeps breaking, it may be time to seek professional help. Loosening screws or trimming back cable sheaths may help temporarily, but a professional electrician can properly diagnose and fix the underlying issue to ensure a long-lasting solution.

Avoid the hassle and potential safety risks by relying on the expertise of a professional.

If You Are Unsure About The Wiring Or Installation Process:

  • If you have minimal experience with electrical work and are unsure about the correct wiring or installation process, it is best to seek professional help.
  • A qualified electrician has the knowledge and expertise to safely handle electrical issues and ensure that the pull switch is properly installed and functioning correctly.

If The Issue Persists Even After Replacing The Switch:

  • If you have already replaced the pull switch but are still experiencing breakages, it may indicate an underlying issue that requires professional attention.
  • A professional electrician can inspect the electrical connections, wiring, and other components to identify any potential faults or problems that could be causing the repeated breakages.

If You Suspect Any Underlying Electrical Problems In Your Bathroom:

  • If you suspect that there may be other electrical problems in your bathroom, such as flickering lights, tripping circuits, or unusual sounds, it is crucial to seek professional help.
  • Faulty electrical systems can be dangerous and increase the risk of electrical fires or electrocution.
  • A licensed electrician can thoroughly evaluate the electrical system in your bathroom, diagnose any underlying issues, and provide the necessary repairs or replacements to ensure safety and proper functionality.

Remember, electrical work should always be handled by trained professionals to reduce the risk of accidents or further damage. Seeking professional help when facing a broken bathroom light pull switch ensures the problem is addressed correctly and minimizes the chances of future issues.

Frequently Asked Questions Of Bathroom Light Pull Switch Keeps Breaking

Why Does My Shower Pull Switch Keep Breaking?

Your shower pull switch may keep breaking due to loose screws or cramped wiring inside. Try loosening the screws and trimming back the cable sheath to relieve pressure on the switch. Cheap materials or defective circuitry can also cause the switch to break faster.

Can You Fix A Pull Cord Light Switch?

Yes, a pull cord light switch can be fixed by loosening screws and ensuring the wiring is not cramped or putting pressure on the switch.

Is It Ok To Leave Shower Pull Cord Switch On?

It is not recommended to leave the shower pull cord switch on. Leaving it off reduces the risk of overheating or fire if something goes wrong.


Low-quality pull cords will break faster due to cheap materials or inferior manufacturing. Sometimes you won’t even have to do anything for your switch to break. The circuitry inside might come defective. After a couple of uses, it may just give up.

To prevent the pull cord switch from breaking again, there are a few things you can do. First, make sure the wiring inside is not too cramped and putting pressure on the switch. Trim back the sheath of the cable and check for any bulky terminal blocks.

Additionally, try loosening the screws that hold the cover in place to release any tension. Finally, consider investing in a higher-quality pull cord switch to ensure better durability and longevity. By taking these steps, you can avoid the frustration and inconvenience of frequent switch breakage in your bathroom.

Hi, I'm Frederick. your superb expert for all things beautiful houses. From troubleshooting to decor tips, I've got you covered. Pleasure to invite you in the DIY helpful work of home modernization.

Similar Posts