How to Update a 1970S Stone Fireplace: Transform with Modern Techniques

To update a 1970s stone fireplace, you can brighten it up by applying a whitewash, paint it a solid color, texture it with a mortar wash, update metal accents with spray paint, frame it with shiplap, or renovate it with stone veneer. Additionally, you can install a new mantel, convert it to a gas fireplace, upgrade the insert, update the surround, update the hearth, reface or resurface it, and update the accessories.

Another option is to disguise a shabby stone fireplace with shiplap, tile, stone veneer, or cement, or modernize it by staining or painting the mantel. These updates will give your 1970s stone fireplace a fresh and modern look.

Enhancing The Stone Fireplace’S Appearance

Brighten up the stone with whitewash

One way to enhance the appearance of your 1970s stone fireplace is by brightening up the stone with a whitewash. Whitewashing adds a beautiful, light and airy look to the stone while still allowing its natural texture and character to show through. The process is relatively simple and can be done by following these steps:

  1. Clean the surface of the stone fireplace to remove any dirt or debris.
  2. Mix the whitewash solution by combining equal parts water and white latex paint.
  3. Apply the whitewash mixture to the stone using a brush or sponge, working in small sections.
  4. Allow the whitewash to dry and assess the coverage. If desired, apply additional coats for a more opaque look.
  5. Once the whitewash is fully dry, seal it with a clear matte sealer to protect the finish.

By brightening up your stone fireplace with a whitewash, you can transform its appearance and give it a fresh, modern feel.

Paint your fireplace a solid color

Another option for enhancing the aesthetic of your 1970s stone fireplace is to paint it a solid color. This allows you to completely change the look of the fireplace and create a focal point that aligns with your personal style. Here’s how you can paint your fireplace:

  1. Clean the stone surface and remove any loose debris.
  2. Apply a coat of high-quality, latex-based primer to ensure proper adhesion.
  3. Once the primer is dry, apply your chosen paint color using a brush or roller.
  4. For a sleek and modern look, consider using a bold or contrasting color.
  5. Allow the paint to dry completely between coats, and apply additional coats as needed for full coverage.
  6. After the final coat is dry, seal the paint with a clear matte or satin finish sealer for added durability.

Painting your fireplace a solid color gives you the opportunity to update and modernize its appearance, leaving you with a stunning focal point for your living space.

Texture your fireplace with a mortar wash

If you’re looking to add depth and texture to your 1970s stone fireplace, a mortar wash is a great option. This technique involves applying a thin layer of mortar over the stone, creating a textured and aged look. Here’s how you can texture your fireplace with a mortar wash:

  1. Prepare the stone surface by cleaning it thoroughly and removing any loose debris.
  2. Mix a mortar wash solution by combining one part mortar mix with two parts water, creating a consistency similar to paint.
  3. Use a brush or trowel to apply the mortar wash to the stone, working in small sections.
  4. After applying the mortar, use a sponge or brush to gently remove some of the mortar and create a textured effect.
  5. Allow the mortar wash to dry for 24-48 hours before applying a clear sealer to protect the finish.

The mortar wash technique adds a rustic and charming look to your stone fireplace, allowing it to blend seamlessly with various design styles.

Modernizing Metal Accents

How to Update a 1970S Stone Fireplace

How to Update a 1970S Stone Fireplace

If you’re looking to give your 1970s stone fireplace a modern touch, updating the metal accents can make a significant difference. By simply changing the appearance of the metal elements, you can transform the overall look and feel of your fireplace. Here are some easy steps to modernize metal accents with spray paint:

Update metal accents with spray paint

If the metal accents of your 1970s stone fireplace are looking outdated or worn-out, a simple solution is to update them with spray paint. Spray paint offers an affordable and effective way to give the metal elements a fresh and modern look. Follow these steps:

  1. Start by cleaning the metal thoroughly with a mild detergent and water to remove any dirt or grease.
  2. Sand the surface of the metal accents lightly to create a smooth and even texture for better paint adhesion.
  3. Apply a coat of metal primer to ensure good coverage and adhesion of the spray paint.
  4. Choose a high-quality spray paint in a color that complements your desired contemporary aesthetic.
  5. Hold the spray paint can about 8-12 inches away from the metal accents and apply thin, even coats for the best results.
  6. Allow each coat to dry completely before applying the next one. Multiple thin coats will provide a more professional and durable finish.
  7. Once you’re satisfied with the coverage and color, let the final coat dry completely, usually for 24-48 hours.

By following these simple steps, you can achieve a refreshed and modern look for the metal accents of your 1970s stone fireplace. Don’t forget to protect the surrounding areas while painting and ensure proper ventilation to allow for optimal drying.

Update the metal accents of your fireplace with spray paint and enjoy the transformation of your 1970s stone fireplace into a modern centerpiece of your living space.

Framing The Fireplace

How to Update a 1970S Stone Fireplace

Updating a 1970s stone fireplace is a great way to bring a fresh and modern look to your living space. One effective way to transform the appearance of your fireplace is by framing it. Framing the fireplace with shiplap can add charm and character to your space, creating a stunning focal point. Here are some steps to follow when framing your fireplace with shiplap:

Step 1: Measure and Prepare

The first step in framing your fireplace is to measure the dimensions of the area you want to cover with shiplap. This will help you determine the amount of shiplap boards you will need. Make sure to prepare the surface of the fireplace by cleaning it thoroughly and removing any dirt or debris.

Step 2: Cut and Install Shiplap

Next, it’s time to cut and install the shiplap boards. Measure the length and width of each section of the fireplace, and cut the shiplap boards to fit. Use a nail gun to attach the boards to the fireplace, starting from the bottom and working your way up. Make sure to leave a small gap between each board for expansion.

Step 3: Finishing Touches

After installing the shiplap, you can add some finishing touches to enhance the overall look of your fireplace. You can paint the shiplap boards in a color that complements your existing d├ęcor or apply a stain to bring out the natural beauty of the wood. Adding a mantel or decorative trim can also elevate the appearance of your fireplace.

By following these steps, you can easily frame your fireplace with shiplap and give it a fresh and modern look. Not only will this update the overall aesthetic of your space, but it will also add value to your home. So, get ready to transform your 1970s stone fireplace into a stunning focal point that will impress your family and friends.

Adding Stone Veneer For A Fresh Look

Renovate with Stone Veneer

If you’re looking to give your outdated 1970s stone fireplace a fresh and modern look, adding stone veneer is a fantastic option. Stone veneer is a lightweight and cost-effective way to completely transform the appearance of your fireplace, creating a stunning focal point in your living space. In this section, we will explore the process of renovating your stone fireplace with stone veneer, step by step.

Step 1: Prepare the Surface

Before applying the stone veneer, it’s crucial to prepare the surface of your fireplace. Clean the stone thoroughly, removing any dirt, dust, or debris that may hinder the adherence of the veneer. Ensure that the surface is dry before proceeding to the next step.

Step 2: Apply Mortar

Using a trowel, apply a layer of mortar to the back of each stone veneer piece. Make sure to spread the mortar evenly to ensure a strong bond with the existing stone surface. Apply the mortar only to a small section at a time, as it can dry quickly.

Step 3: Attach the Stone Veneer

Press the stone veneer firmly onto the prepared surface, ensuring that it aligns properly with the adjacent pieces. Gently wiggle the stone to create a secure bond with the mortar. Continue this process, piece by piece, until the entire fireplace is covered with the stone veneer.

Step 4: Fill the Gaps

Once the stone veneer is in place, fill any gaps between the stones with mortar to create a seamless and natural-looking finish. Use a pointing trowel or a grout bag to carefully fill in the gaps, ensuring that the mortar matches the color and texture of the stone veneer.

Step 5: Finish with a Sealant

To protect the stone veneer and enhance its longevity, apply a sealant according to the manufacturer’s instructions. This will help prevent any staining or damage and keep your newly updated fireplace looking fresh and beautiful for years to come.

By following these steps, you can easily transform your outdated 1970s stone fireplace into a modern and stylish centerpiece, adding value and charm to your home. Whether you choose a sleek and contemporary look or a rustic and cozy feel, stone veneer will give your fireplace the fresh update it deserves.

Upgrading The Surround And Hearth

When it comes to updating a 1970s stone fireplace, one of the key areas to focus on is the surround and hearth. By giving these elements a fresh look, you can transform the entire look and feel of your fireplace. In this section, we will discuss different ways to upgrade the surround and hearth, including refacing or resurfacing the fireplace, updating the surround, and updating the hearth.

Reface or Resurface the Fireplace

If you’re looking to give your stone fireplace a completely new look, refacing or resurfacing is a great option. This process involves covering the existing stone with a new material, such as brick, tile, or stone veneer. By doing so, you can create a modern and updated fireplace that suits your style and complements the overall aesthetic of your space.

Update the Surround

Updating the surround of your stone fireplace can make a big difference in its appearance. There are several ways you can update the surround, depending on your preferences and budget. One option is to paint the stone or brick fireplace, which can instantly brighten up the space and give it a fresh new look. Another option is to install a new mantel, which can add a modern and stylish touch to the fireplace.

Update the Hearth

The hearth of your fireplace is not only functional but also plays a significant role in the overall look of the fireplace. Updating the hearth can enhance the aesthetics and make a big impact on the overall design. Consider adding new tile or stone to the hearth for a more modern and polished look. You can also choose to add concrete or other materials that suit your style and preferences.

By upgrading the surround and hearth of your 1970s stone fireplace, you can give it a fresh and modern look that will instantly transform the entire space. Whether you choose to reface or resurface the fireplace, update the surround, or update the hearth, these changes will make a significant difference and breathe new life into your old fireplace.

Final Touches And Accessories

Final Touches and Accessories

Once you’ve updated the fireplace structure and created a new focal point with a stunning mantel and surround, it’s time to add those final touches and accessories to complete the transformation. These small details can make a big difference in the overall look and feel of your fireplace. Here are some ideas to consider:

Update the accessories

  • 1. Fireplace Tools: Invest in a new set of fireplace tools that complement the style of your updated fireplace. Look for sleek designs and finishes that will enhance the overall aesthetic.
  • 2. Firewood Holder: Add a stylish firewood holder near your fireplace to keep logs neatly organized and easily accessible. Choose a design that adds visual interest to the space, such as a metal or woven basket.
  • 3. Decorative Elements: Enhance the ambiance of your fireplace with decorative elements like candles, vases, or sculptures. Select items that reflect your personal taste and complement the style of your revamped fireplace.
  • 4. Artwork or Mirror: Hang a piece of artwork or a mirror above the fireplace to create a focal point and add visual interest. Choose a piece that fits the overall style and color scheme of the room.
  • 5. Lighting: Consider incorporating lighting elements into your fireplace design. Install sconces or recessed lighting on the walls surrounding the fireplace to create a warm and inviting atmosphere.
  • 6. Fireplace Screen: Upgrade your old fireplace screen with a new, decorative screen that complements the style of your updated fireplace. Look for designs that add a touch of elegance or modernity to the space.

By updating the accessories and adding these final touches, you can elevate the overall look and feel of your 1970s stone fireplace. These small details will help create a cohesive and stylish design that will impress your guests and make your fireplace a focal point in your home.

Frequently Asked Questions On How To Update A 1970S Stone Fireplace

How Do You Modernize A 70S Stone Fireplace?

To modernize a 70s stone fireplace, you can consider the following options: 1. Brighten it up with whitewash or paint it a solid color. 2. Give it texture with a mortar wash or add new materials like marble or brick to the surround.

3. Install a new mantel or update the existing one. 4. Convert it to a gas fireplace for a more contemporary look. 5. Update the hearth or resurface the fireplace. These changes can help transform the outdated stone fireplace into a modern focal point in your space.

What To Do With 1970S Stone Fireplace?

To modernize a 1970s stone fireplace, you have several options: 1. Whitewash or paint the stone for a fresh look. 2. Install a new mantel for added style. 3. Update the surround with materials like marble tile or brick. 4.

Add texture with a mortar wash. 5. Frame the fireplace with shiplap for a trendy touch. 6. Consider resurfacing or adding stone veneer.

How Do You Modernize An Old Stone Fireplace?

To modernize an old stone fireplace, try these methods: 1. Brighten it up with whitewash. 2. Paint it a solid color. 3. Texture it with a mortar wash. 4. Update metal accents with spray paint. 5. Frame it with shiplap.

6. Renovate it with stone veneer.

Conclusion

Revive your outdated 1970s stone fireplace with these simple yet effective tips. Update the look by painting the stone with a fresh coat of paint or whitewash. Consider adding a new mantel or surround to modernize the design. If you’re feeling adventurous, you can even resurface the fireplace with new materials like tile or stone veneer.

The possibilities are endless when it comes to transforming your stone fireplace into a stunning focal point in your home. Don’t let your fireplace be a relic of the past; give it a much-needed makeover today!

Hi, I'm Frederick. your superb expert for all things beautiful houses. From troubleshooting to decor tips, I've got you covered. Pleasure to invite you in the DIY helpful work of home modernization.

Similar Posts